NOTE: All pipe lengths are estimated to be slightly long. Pipe couplings will slightly reduce length of cross braces, and terrain variations may affect lengths as well. Pipe is typically purchased from a plumbing supply in 21 foot sections. It is important to make sure the pipe is threaded on both ends and includes a coupler. Use this coupler to connect pipe sections together for the Horizontal Pipe.
The Ultra Rail engineering for 3 rail systems is only valid for IBC 2015 and earlier. Please adjust your Building Code, or contact SnapNrack Technical Support 877-732-2860 for assistance.
Contact SnapNrack Technical Support
Contact SnapNrack Technical Support 877-732-2860 for assistance in designing tilt up applications.
Mill Finish Rail is not available in "Packaged Quantities"
Terms of Service
The SnapNrack Series 200 configuration tool is intended to prepare a mounting system bill of materials according to SnapNrack’s structural engineering requirements. This tool is not intended to substitute installation manuals or be used in lieu of structural engineering. Design results are based on the capacity of the mounting system as it relates to inputted fields for project details and site conditions.
Use of this tool assumes the end user properly assesses project details and site conditions to ensure inputs are accurate, the resulting SnapNrack products selected are appropriate for the application, and the mounting system design meets all applicable code requirements.